How to Replace Rear Bumper Cover 2011-17 Toyota Camry

1. step 1 :Removing the Rear Bumper 0:26

   • Use a flat blade screwdriver to remove the two upper bumper mounting bolt covers
   • Use a 10mm socket to remove the mounting bolts
   • After raising the vehicle, use pliers to remove the two bumper body clips
   • Use a 10mm socket to remove the four lower bumper mounting bolts
   • Use a 10mm socket to remove the screws behind each of the rear tires
   • Use a 10mm socket to remove each of the rear fender well mounting bolts
   • Grab the bumper cover, starting at the driver side rear fender well, and pull it to release it from the trim clips (you can use a trim tool to loosen the clips as necessary)

2. step 2 :Replacing the Rear Bumper 2:12

   • Line up the bumper clips with the bottom of the tail light and press it into place
   • Use a 10mm socket to replace the two upper bumper mounting molts
   • Line up and replace the two mounting bolt covers
   • Use a 10mm socket to replace the rear fender well mounting bolts
   • Use a 10mm socket to replace the screws behind each of the rear tires
   • Use a 10mm socket to replace the four lower bumper mounting bolts
   • Replace the two bumper body clips

Tools needed

• Flat Blade Screwdriver

  10mm Socket

  Slip-Joint Pliers

  Trim Tool Set