Created on: 2013-12-26
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on Honda Civic, years 96, 97, 98, 99, and 00.
Flat Blade Screwdriver
Phillips Head Screwdriver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to replace the rear window switch on this 1998 Honda Civic. We show you on the driver side, but it's the same procedure on the passenger side. The only tools you'll need for this are a flat blade screwdriver and a Phillips screwdriver.
Use the flat blade screwdriver and pry off your door pull handle trim panel. Then disconnect this harness by pushing on the tab and pulling it out. Then your switch pulls right out.
On the back of your switch there are two Phillips screws. Just go ahead and remove both of those. Your switch pulls free.
Take your new switch; push it into place. Push those two Phillips screws back into place and tighten those up.
Push your switch panel back into the door and reconnect the harness. Then push your pull handle trim panel back into place and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to reset the automatic window feature on 10, 11, 12, 13, 14, 15, 16 Cadillac SRX