How to Replace Rear Reflectors 2005-16 Toyota RAV4
Created on: 2019-09-17
If the reflector is broken, find out how to do this quick and easy repair yourself with this how-to video
-
step 1 :Removing the Rear Reflector
- Remove the two Phillips screws from the rear reflector
-
step 2 :Installing the Rear Reflector
- Insert the rear reflector into place
- Tighten the two Phillips screws to the reflector
What's up guys? I'm Andy from 1A Auto. In this video, I'm going to show you how to replace the rear reflectors in this 2010 Toyota RAV4. If you need parts for your vehicle, click the link in the description and head over to 1AAuto.com.
All right. To take this reflector out from the backside of the bumper, there's a screw right here towards the outside of the vehicle. Just take a Phillips head screwdriver and loosen up this screw. We'll take that screw out completely. As I do that, I'm just going to hold the reflector from the outside, can just push on the tab and slide the reflector out. On the backside, there's a little tab right here that's going to slide into the slot towards the middle of the vehicle. Then, push on that and then take the screw with the Phillips head screwdriver. Line that up, get that started, and just snug it up.
Thanks for watching. Visit 1AAuto.com for quality auto parts shipped to your door, the place for DIY auto repair. If you enjoyed this video, please click the subscribe button.
Truck Leaning Sagging or Uneven How to Inspect Leaf Spring Suspensions
If you hear clunking or creaking noises when you load the bed or drive around, or if your truck has a lean to it, check out this video.
