How to Replace Serpentine Belt 2007-17 Ford Expedition

Okay, friends, before we get started, I just want to give you a heads up. You can access the serpentine belt and all the pulleys from right up along here, but it's actually much easier for me down underneath. So let's get under there. Now, coming underneath the truck, you want to make sure if you have a skid plate, you take it down and out of the way. That's gonna give you a nice clear view of what's going on on the front of the engine.

This right here is the serpentine belt tensioner. We're gonna relieve tension on this, and then we'll take our belt right off of this pulley. And then we can release that tensioner and get our tool out of here as well. If you wanted to, you could try to pay attention to which way the belt is routed, but we're gonna be showing you how to put it on anyway. Let's go ahead and get the belt right out of the way. You'll notice it comes right in between there.

Now, it's gonna be time to install our brand new belt. Before you go ahead and put it on, though, make sure you inspect it and make sure it's the same size as your original belt. Once you've done that, take one corner like this and we're gonna come right in between this area right here. Gonna bring this down and bring it over the AC compressor. The top aspect of the belt, let's bring it underneath this pulley right here, up and over the alternator, around under this pulley, and then around the power steering all the way down at the far end. Right down here with my left hand, I'm gonna start putting this down and around the crank. And then I wanna come up nearing the water pump, just like this. Let's grab our serpentine belt tool. I'm just gonna pull down on this. Now, we'll pull this up and over the water pump. This looks great. Go ahead and relieve tension, but we're not gonna remove our tool yet. You need to double-check all of your pulleys, especially the ribbed ones, and make sure the belt's situated perfectly inside all the ribs. This feels amazing.

All right. Let's get our tool out of here. All right. Now, if you had a cover under here, make sure you go ahead and put that back on. The next thing we're gonna wanna do is carefully start up the truck, let it run for about 10 seconds, turn it back off. We're gonna come back out and we're gonna double-check those pulleys. Assuming they're good, take it for a road test.