Created on: 2013-05-14
If the ignition wires need to be replaced, this video will show you the steps to properly replace it yourself
10mm Wrench
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the plug wires. We're actually just going to do the first one.
Number one: it's really easy. You need a 10mm wrench to get the engine cover off. Then you just take everything else apart by hand.
I've located the coil next to the gear box, on the left hand side, driver side of the engine. I'm going to access it by removing four 10mm bolts that hold the engine cover in place.
First, remove the coil, spark plug wires from the coil, and from the valve cover. I'm going to start on the right hand side with the first one and I'm going to take them off one at a time. When they're loose from the coil pack from the valve cover, pull it out.
I'm going to reinstall the plug wire from 1AAuto back into the coil. I'm going to then repeat for cylinder two. When I'm finished with that, three, and then four. The final step is to put the engine cover back on.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Watch this video to learn how to make new spark plug wires part of your next tune up on your 1992-2000 Chevy Tahoe.