How to Replace Tail Light Bulbs 2014-19 Chevy Silverado
Created on: 2019-05-13
Watch this video to learn how to replace the brake, turn, and reverse light bulbs in your 14-19 Chevy Silverado. Check your lights today!
-
step 1 :Removing the Tail Light Assembly
- Lower the tail gate
- Remove the two T15 bolts
- Pull on the tail light assembly to release the two locking pins
-
step 2 :Removing and Replacing the Bulbs
- Each bulb socket and bulb comes out the same way
- Twist counter clockwise
- Pull the bulb out
- Top and bottom sockets are for the brake lights and turn signals
- Use a 7444 bulb type
- The middle socket is for the reverse light
- Use a 921 bulb type
- Each bulb socket and bulb goes in the same way
- Insert the bulb into the socket
- Align the tabs on the socket to fit into the housing
- Twist clockwise to secure it
-
step 3 :Replacing the Tail Light Assembly
- Push the tail light assembly locking pins into place
- Replace the two T15 bolts
- Close the tail gate
Tools needed
-
T15 Torx Driver
Ratchet
What's up, guys? I'm Andy, from 1A Auto. In this video, I'm going to show you how to replace the tail light bulbs on this 2015 Chevy Silverado. If you need parts for your vehicle, click the link in the description, and head on over to 1aauto.com.
Open the tailgate. You want to take these two screws out. I'm going to use this T15 socket, and a ratchet. Take that out. Take the lower one out as well. Just grab the tail light. You just want to pull the tail light forward. There's two pins in the back. Just like that. Right there, and right there.
So these two bulbs are the brake light, running light, and turn signal bulbs. This bulb right here is the reverse light bulb. Grab this light socket, and just twist it to the left. Slide the bulb out, and we can pull the bulb out of the socket. Just like that. This bulb is a 7444. Slide this back into the socket. Take the socket and reinstall it into the light. Take this socket, twist it to the left. Slide it out, and grab the bulb, and just slide it straight out. This bulb is a 921. Take the bulb, slide it into the socket. Line the socket up, and twist it. Procedure for this bulb is the same as the top one.
Line these pins up on the body. Press it in. These two screws, put those in. Take our T15 and a ratchet, tighten these up. Nice and snug. And you can do the same for the other side.
Thanks for watching. Visit 1aauto.com for quality auto parts shipped to your door, the place for DIY auto repair. And if you enjoyed this video, please click the subscribe button.
How to Replace Tail Light 2001-05 Honda Civic
How to install, repair, fix, change or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped tail light / brake light on 01, 02, 03, 04, 05 Honda Civic
