How to Replace Torque Strut Engine Mount 2003-07 Ford Focus
Created on: 2014-02-04
Check out this 1A Auto video showing you how to replace the lower engine torque strut mount on your 03-07 Ford Focus.
-
step 1 :Removing the Torque Strut Mount
- Remove the 13mm bolt that holds the torque strut mount to its bracket
- Remove the 13mm bolt from the underside of the torque strut mount
- Push the torque strut mount back
- Remove the two 13mm bolts from the torque strut mount bracket
-
step 2 :Installing the New Torque Strut Mount
- Put the new torque strut mount into place
- Insert the top bolt into the torque strut mount bracket
- Insert the bottom bolt into the bracket
- Insert the bolt into the underside of the torque strut mount
- Insert the bolt that holds the mount to the bracket
Tools needed
-
13mm Socket
Jack Stands
Ratchet
Floor Jack
13mm Wrench
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we going to show you how to replace the torque strut mount on this 2005 Ford Focus and the tools you'll need are a jack and jack stands and a 13mm socket and ratchet and a 13mm wrench.
Your torque strut mount is located right here. You can see it's held in with two 13mm bolts: one here and one right here. You want to start off by just removing those. We'll just fast forward as Don removes both of them. Push the torque strut mount back and then next you want remove these two 13mm bolts on this bracket. You want to use a wrench and another wrench so you can have some added leverage here and just break those bolts free. Then you can just remove them the rest of the way and you'll see he starts off using a wrench but then he switches to using a socket and ratchet. Now repeat this same process for the upper bolt. For this one, it may be easier to use the socket and ratchet from up above. Then once you twist out that last bolt, you can just pull that bracket and the torque strut mount down.
Take your new torque strut mount and put it up into place and push your bracket in place. It's easier to do the top bolt first. Just replace that bolt and tighten it up. We'll just fast forward as he replaces the other bolt and tightens both of those up. Once the bracket is tightened into place, replace your two bolts on your torque strut mount and tighten those up.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
Ford Focus 3 Piece Engine & Transmission Mount Kit TRQ MTA35050
Part Details:
- 3 Piece
- (1) Transmission Mount
- (1) Front Engine Mount
- (1) Rear Engine Torque Strut Mount
How to Replace Engine Mounts 2007-14 Cadillac Escalade
This video shows you how to install new TRQ engine mounts on your 2007-2014 Cadillac Escalade.
