How To Replace Transfer Case Speed Sensor 1995-99 Chevy Tahoe
Created on: 2014-03-18
This video from 1A Auto will show you step by step how to replace the transfer case speed sensor on your 95-99 Chevy Tahoe.
-
step 1 :Removing the Transfer Case Speed Sensor
- Disconnect the transfer case speed sensor wiring harness
- Remove the sensor from the transfer case using an adjustable wrench
- Pull of the sensor
-
step 2 :Installing the New Transfer Case Speed Sensor
- Push the new sensor into place
- Tighten the sensor with an adjustable wrench
- Connect the sensor wiring harness
Tools needed
-
Adjustable Wrench
Flat Blade Screwdriver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to replace the transfer case speed sensor on this 4-wheel drive 1996 Chevy Tahoe, and the only items you'll need for this is an adjustable wrench and a flat-blade screwdriver.
The transfer case speed sensor is located right here, and you want to start off by just pushing the tab on the harness and disconnecting it. And then use an adjustable wrench to remove the sensor. And we'll just fast forward as Don does this. The speed sensor will pull out. Push your new sensor into place, and tighten it up. Then replace your harness, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Output Speed Sensor 2004-09 Dodge Ram
Check out this video on how to replace the output speed sensor on your 04-09 Dodge Ram.
