How to Replace Wheel Bearing Hub Assemblies 1999-2004 Jeep Grand Cherokee
Created on: 2023-11-29
This video shows you how to install new wheel bearing & hub assemblies from TRQ on your 1999-2004 Jeep Grand Cherokee.
Tools needed
-
12mm Socket
13mm Socket
Torque Wrench
Pry Bar
17mm Socket
18mm Socket
19mm Socket
3/8 Inch Drive Ratchet
5/16 Inch Socket
Safety Glasses
1/4 Inch Ratchet
Gloves
Dead Blow Hammer
Brake Caliper Hanger
1/2 Inch Ratchet
Wheel Chocks
Brake Caliper Compressor Tool. Dual Piston. Pump Style.
10mm Socket
Drain Pan
Floor Jack
36mm Socket
Shop Products
1999-04 Jeep Grand Cherokee 4 Wheel Drive Front with Dana 44 Axle 18 Piece Steering, Suspension, & Drivetrain Kit TRQ PSA72913
Part Details:
- (2) Front Sway Bar Links
- (2) Front Wheel Bearing & Hub Assemblies
- 18 Piece
- (2) Front Lower Ball Joints
- (2) Front Upper Control Arms
- (1) Front Tie Rod Adjusting Sleeve at Pitman Arm
- (1) Front Outer Steering Arm to Center Link Tie Rod
- (2) Front Lower Control Arms
- (1) Front Center Tie Rod Adjusting Sleeve
- (1) Front Inner Tie Rod to Pitman Arm
- (1) Front Outer Tie Rod to Pitman Arm
- (1) Front Outer Tie Rod
- (2) Front Upper Ball Joints
How To Replace Rear Wheel Bearing and Seal 1992-99 GMC K1500
If you hear a grinding or groaning noise while your vehicle is rolling, it might have a worn out wheel bearing. A worn bearing can allow the wheel to wobble, creating a host of other issues. To save yourself from more headaches down the road, replace your bearing right away. For solid rear axles, you'll need to replace the axle seal too. How to install a new TRQ wheel bearing and axle seal on your 1988-2002 GMC K1500.
