How To Replace Wiper Arm 2009-17 Volvo XC60
Created on: 2014-07-07
How to repair, install, fix, change or replace a damaged, bent, or failing windshield wiper armon 2010 Volvo XC60
-
step 1 :Removing the Wiper Arm
- Pry off the wiper arm cap with a flat blade screwdriver
- Remove the 13mm nut from the wiper arm
- Pull off the wiper arm
- Unclip the wiper blade from the wiper arm
-
step 2 :Installing the Wiper Arm
- Clip the wiper blade onto the wiper arm
- Put the wiper arm into place
- Fasten the 13mm nut onto the wiper arm
- Push on the wiper arm cap
Tools needed
-
Flat Blade Screwdriver
15mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a wiper arm on this 2010 Volvo XC70. We show you on the driver side but the passenger side is the same procedure. The tools you'll need are a flat blade screwdriver and a 15mm socket and ratchet.
At the end of both wiper arms you'll see these caps. Pry off the cap on the wiper arm you want to replace, and then remove this 15mm nut. Then just push it in and out a couple times and then lift it up and off the stud.
Push the button on the wiper blade and pull it free, and then push it into your new wiper arm. Take your new wiper arm, push it down onto the stud, and line it up where you want it. Then replace that 15mm nut and tighten it up. Then just replace that cap and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Install Rear Wiper Mounting Nut Cap 2009 Chevy Sububan
How to replace a broken or missing rear wiper arm cap on 09 Chevy Suburban
