Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Tail Light 2003-04 Jeep Grand Cherokee
Created on:
Tools used
Phillips Head Screwdriver
1. Removing the Tail Light
Remove the two Phillips screws from the tail light.
Pull the taillight forward.
Disconnect the connector on the back of the light.
2. Changing the Bulbs
Turn the caps to unlock and pull the bulbs free.
3. Replacing the Tail Light
Reconnect the harness to the light.
Line the taillight up and push it into place.
Replace the two Phillips screws.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi I'm Mike Green, I'm one of the owners of 1A Auto. I want to help you save time and money preparing and maintaining your vehicle. I'm going to use my 20 plus years' experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
'99 to 04 Jeep Grand Cherokee taillights, pretty easy, just need a Phillips screwdriver and two screws there and down there. Headlight off the taillight almost wants to jump off now. Then I'm going to get it from the other side here, and the lights come out. See here there's a single connector. You can service the bulbs they just unlock.
They're a little difficult to turn but you can do it. I'm working back and forth and pull them out or service the whole bulb and service whole light, and you can see actually the screws go through there but then they go into these tabs here and that's what they actually hold onto it with, so this is just kind of a trim point.
Now, we want to connect everything back up, put that on. Lock that red tab and there is a little mounting ball lines up and goes right into there. You could see that ball goes right into there. That's in and that puts you back to this angle. Wrap that around. Screws going to go through. Whether you need to replace just the bulb or you want to replace the whole thing. That's how you do it.
We hope this helps you out. This video is brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Call us toll-free, 888-844-3393. We're the company that's here for you on the internet and in person. Thank you very much.
Product Reviews
Loading reviews
4.41/ 5.022
22 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
16
3
1
0
2
Same defect as OE
Robert
January 21, 2017
Hi, I had to replace tail lights because of the pressure of the water tight bulb holder pushing in on the plastic contacts push down on them eventually disconnecting the contacts and lights not working. The problem is there is a space between the contact holder and the interior of the tail light. So even these new tail lights have the same spacer, again pushing the plastic contact holders down and disconnecting them from the bulb holder. Not 1Aauto's fault, but manufacture. I had to fill in the spacer with a hard plastic to keep the contacts connected.
Perfect fit!
JIMMY
January 21, 2017
Exact fit for my make and model. Great price as well.
Tail Lights
James C
March 8, 2017
I have been very well pleased so far with the performance & fitting of them. Well Pleased
Great for money
J
June 25, 2017
Easy install no issues. Nice amd bright. Durable, shipped and packaged well.
MORE THAN I EXPECTED
B
January 30, 2018
to all
.... perfect fit .... the old ones just simply disintegrated where the light-bulb unit attached --- so there was no 'ground'
..... will deal with these folks again - well packed - in individual boxes, secure with both boxes in an outside shipping box, timely & prompt shipping and well tracked
==== keep up the good work
Best part website of 2018
R
April 17, 2018
I ordered new lights new rear light and now my 2001 Jeep Laredo looks clean new lights very brighter shiny very recommend to family
Tail light and socket jeep Grd Cke
A
September 3, 2018
One of the plastic hold downs broke off when removed from packaging because it was caught in the bubble wrap. Could not get lights to work and kept blowing the fuse. Finally took to Jeep dealer and found one of the sockets and panels were shorting. Replaced with the original panels.
No problems
A
December 7, 2018
Shipping was faster than expected. I got the correct parts cheaper than anywhere else I looked. Parts fit and work great.
Quick simple right parts
Z
March 21, 2019
Arrived quickly, good price, packaged well. Perfect fit! My jeep is happy.
Taillights and CV Axles
Brody
March 22, 2019
Got these for my 2000 Jeep Grand Cherokee. The taillights are a horrible design and are prone to burning up or lights not working due to the design. These lights are a perfect fight and work great. The CV axles were also a perfect fit. Both products are great quality, and the prices were amazingly cheap. Youve got yourself a lifetime customer!
Perfect Fit
G
August 15, 2019
These taillights fit perfectly. Was better to change the whole assembly than piece by piece. Quick change too, only needed a screwdriver.
Perfect fit
Ryan
August 31, 2019
Should up faster than expected shipped perfect in bubble wrap no scratches or defects perfect fit with instructions fo bulb inserts.
Part's
J
December 19, 2019
I live in a small town with only a high priced Napa. All my orders have been on time and a fair price as a person that loves to work on my own vehicles 1A Auto is a blessing.
Great service and prompt delivery
David
September 17, 2020
fully satisfied
Boulter
September 25, 2021
Still have an issue with the lights going out intermittently. I did not get to use the lights you sent with them because of how they are designed to go thru the bumper and under the back but I think it is a design flaw from Jeep! These do not fail as often s the originals!
TOMMEY
April 15, 2022
Very easy to install, just an old man opinion.
Dale
May 11, 2022
Awesome
defective tail light
james
August 9, 2022
I was only able to use the left side tail light. The right side tail light was no good. I only purchased both so they would match. After installing the no. 23 fuse kept blowing and I was able to determine the right side tail light was the problem. I re-installed the old right side tail light
and the problem was solved. Do not know how to return just the one.
I have been using 1AAuto a long time and this is the first time I have had any problem
with a part from 1AAuto. Just to be clear I tried many times with the new tail light and went through six fuses.
Barry
April 24, 2023
Tail lights were good but the socket set didn't come with it.
[{"url": "https://images.turnto.com/media/pNISJll75W64CYGsite/23f2913158018cebdad3238d71034ec0_1712348217020_0.jpeg", "caption": "Very satisfied you can't tell the difference between factory or aftermarket"}]
Allan
April 5, 2024
Very satisfied with quality you can't tell the difference between these if they were factory or aftermarket
Not too bad
Exain
November 17, 2024
Looks good , works good however the light bulb sockets were hard to turn into place. My son and I ended using pliers to turn the socket in position.
Thomas
January 17, 2025
Works good. The sockets are very touchy. If you install them and one of the bulbs doesn't work. Turn the socket just a little bit to make a better connection. .
Customer Q&A
Does it include the circuit board?February 16, 2016
P E
10
Yes it does! It's a great item from A1! Very happy with mine and I'm sure you will be too!
February 16, 2016
Leo J
10
Yes. It includes everything you need to do a total replacement
February 16, 2016
Mike S
10
Yes they have the circuit boards attached.
February 17, 2016
Brian F
10
It is the complete tail light assembly for both sides, so yes
February 17, 2016
Edward H
10
Yes
December 30, 2017
Don C
10
Yes
December 7, 2018
A N
10
Yes
March 21, 2019
Z H
10
Yes,but not the sockets ,they need to be ordered separate.
August 16, 2019
G U
10
Yes
December 19, 2019
J D
10
Yes
December 22, 2019
T J
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.