Kit Includes: (1) Front Driver Side Shock & Spring Assembly (1) Front Passenger Side Shock & Spring Assembly
Quantity: 2 Piece
Specification
Side Location
Driver & Passenger Side
Trim
XE
Drivetrain
4 Wheel Drive
Location
Front
TRQ fully loaded shocks and struts are manufactured using premium raw materials and calibrated to restore original ride comfort. TRQ shocks are fully loaded featuring a pre-loaded bearing plate, upper and lower spring isolator, upper spring seat, coil spring, boot kit, and premium strut. TRQ recommends replacing your shocks or struts in pairs to ensure even wear of components and improved ride comfort. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Loaded Struts: Pre-assembled application specific design
Application Specific Design: No modifications necessary
Matched Pair: Improved comfort and extended service life
Restored Performance: Reduced body sway and vibration
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Shock Spring Assembly 2004-15 Nissan Titan
Created on:
Tools used
21mm Socket
A Piece of Pipe (for leverage)
Hammer
Torque Wrench
14mm Socket
Jack Stands
19mm Wrench
Center Punch
19mm Socket
Ratchet
Floor Jack
1. Removing the Wheel
Loosen the lug nuts with the vehicle on the ground
Raise the vehicle with a floor jack
Secure the vehicle on jack stands
Remove the lug nuts
Pull off the wheel
2. Removing the Strut
Hold the 19mm bolt at the bottom of the strut with a 19mm wrench
Remove the 19mm nut with a ratchet and a piece of pipe for leverage
Knock the bolt out with a punch and a hammer
Remove the three 14mm nuts from the top of the strut
Use a hammer to knock the strut out of place
Pull the strut down and out
3. Installing the New Strut
Push the new strut up into place
Insert the three 14mm nuts onto the top of the strut
Hammer the lower end of the strut into place
Push down on the wheel knuckle as you push the 19mm bolt into place
Tighten the 19mm nut onto the 19mm nut
Tighten the lower nut to 100 foot-pounds of torque
Tighten the upper nuts to 25 foot-pounds of torque
4. Reattaching the Wheel
Slide the wheel into place
Start the lug nuts by hand
Tighten the lug nuts preliminarily
Lower the vehicle to the ground
Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
Reattach the center cap
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace a front strut on this 2004 Nissan Titan, and we show you on the passenger side but the driver's side is a similar procedure. The items you'll need for this are a new front strut from 1AAto.com, 14, 19, and 21mm socket and ratchet, a piece of pipe for extra leverage, a hammer, a punch, jack and jack stands, a torque wrench, and a 19mm wrench.
To start off, you want to remove you wheel, so just remove these lug nuts. On this vehicle it was 19 mm, but because they're not stock wheels, yours may be slightly different. If you don't have air-powered tools, you're going to want to loosen the lug nuts preliminarily, raise the vehicle, and the remove them the rest of the way. Once those are removed, your wheel will pull right off.
At the bottom of the strut you'll see this 19mm bolt. You just want to go ahead and remove that. You can see, we use a piece of pipe for some extra leverage. Once it's broken free, you don't need the pipe anymore. We'll just fast forward as he uses a 19mm socket and ratchet on one side and a 19mm wrench on the other. Once you've removed the nut, using a punch and a hammer, knock out the bolt. Then, remove these three 14mm nuts at the top of your strut. We'll just fast forward as Don does this. Use a hammer to knock the strut out of place and then pull it down. Then, angle it up and down and out.
On the left is the old strut. On the right is the new one from 1A Auto. You can see they're identical and they're going to fit exactly the same. Insert the new strut and push those studs up through. Once you've got them up into place, just replace those three 14mm nuts. We'll fast forward as Don does this. Now, carefully hammer the lower end of the strut back into place. Then push down on the wheel knuckle and push your bolt back into place. Then hammer it in the rest of the way. We'll fast forward as Don replaces the nut and tightens it up. You want to torque this lower bolt to 100 foot-pounds and the three 14mm nuts to 25 foot-pounds. We'll fast forward as Don replaces the wheel and replaces the lug nuts and tightens them up preliminarily. Then you want to lower the vehicle and tighten them the rest of the way and torque them in a crossing pattern to 100 foot-pounds.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
SCA61074
In Stock
Product Reviews
Loading reviews
4.35/ 5.026
26 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
17
5
2
0
2
Installed on Armada 4x4
Haro
February 11, 2017
Easy installation because it was loaded assembly. Good price, and so far after a week of installation seems to be holding good. My only issue is when compared to original shocks, the lower eye ring hole is not as beefy. The metal ring hole is almost half the width of the original shocks ring. I am afraid they will break if I go off road. But I measured the weight, and noticed those new ones were 2.2 pound heavier than the original, so hopefully they hold well on the dirt roads.
kevin
March 11, 2017
as good as my original struts. I would recommend these for anyones truck
Great good service on-time delivery you guys are pretty good I recommend you guys to anyone for parts thanks for your help
B
June 22, 2017
They work great your service of delivery was on time I recommend you to anyone any of my friends thanks for your help and a good price to thank you
Excellent
M
June 25, 2017
Bought these to put on my truck perfect fit and price was great. Will order again thank you.
Excellent product
D
July 9, 2017
I have a Nissan Armada very good front strut and easy to remplas
L
September 13, 2017
Lkeep the product I purchased, fit like a glove, would to see more videos on other DIY rear shock ,wheel hubs bearing front and rear, overall excellent product and price, Thanks
Ps parts fit and look like original
Leacree worse struts made
C
October 20, 2017
Now I know why the name brand of theses struts are not listed on the website. Would not recommend these struts to anyone..I will be returning and going with Monroe. They turned out to be Leacree struts made in China.. The ride is horrible, loud, bounces, bottoms out going over speed bumps...etc.. However everone at 1A Auto have been great.
Perfect fit for my 2009 Armada
C
November 6, 2017
I installed these on my 09 Armada this weekend. The install was smooth. It's so nice to buy the loaded assembly and not have to worry about spring compressors. The assemblies that I took of were so shot that these feel like a dream. It does seem a little bouncy though, but I'll let them settle in and see how it goes. Can't beat the price or the service provided by 1A auto.
Front struts
robert
November 27, 2017
These struts are for a 4wd Titan not a 2wd drive as of mine ride is too stiff but not a fault of A1Auto they are doing a refund plus shipping back to them. The MFG. is at fault.
Installed on 2008 Armada LE
Jason
February 24, 2018
Job took approximately 1.5 hours from start to finish. The video helped tremendously and the shocks are riding wonderfully so far. Replacement was a breeze and were a perfect fit.
Nissan Titan 2005 se
Roy
March 11, 2018
Well first time buyers , the installation was little hard but by the end fixed perfectly
Very Happy
M
April 10, 2018
Happy with the Struts. Rides great. Easy to install. Did have a issue with one of the struts But the people at A1 took care and the issue very fast and with no problems at all
Awesome
Sheldon
June 25, 2018
Fast shipping good products a+++++ highly recommended, will definitely be shopping here again
Alan d auto mechanic
Allen
August 14, 2018
the front strut assemblies I receive worked perfect they were quick easy simple replacements I will use A1 Auto again for future repairs on my vehicle thanks guys everything was perfect
isaac
September 9, 2018
the order was on time and it was the right one..most time i have to send things back to other company. but your company is real good. i will order from your company from now on...
Easy install
Dalton
September 27, 2018
Good quality and easy to install. Very DIY friendly!
Spring shock assembly
Bill
January 5, 2019
Spring shock assembly came as advertised. Shipping was fast. Reassembly was fast and fit was right on. No problems. Work great
The shocks did not have boots on them but thay did fit good
charles
November 7, 2019
Thay fit good
Front quick struts on 07 titan
Travis
March 14, 2020
So 2 years ago i cheaped out and got some knock offs for like 40 bucks. Shoulda went with ones 1aauto sells. Remember, buy cheap and you buy twice. 1aauto has gotten a few $ from me as i perform the reg maintenance on both my vehicles. And if you get stumped they have a ton of videos. Thanks again. Highly recommend
Very good
Quiana
August 4, 2020
This product I would buy again and suggest this site to all my friends and family
Rough
jose
October 26, 2020
Makes to much noise without the rubber spring protector
Ana
October 11, 2021
Amazing
Great product
Chad
May 6, 2022
Very easy to install, works perfect.
Patrece
March 12, 2023
Delivery time was great and my truck rides much better !
Bad quality.
Mike
April 22, 2023
One shock was faulty. I need to send them back. Yes please.
2006 Titan front end rebuild
Kaden
May 28, 2024
The first thing I have to say is I received these next day. The coil over is gorgeous,seems to be a better build than oem. I did the cv's and the hubs also and I couldn't be happier.Easy install?2006 Titan LE. Ordering rear shocks next??
Customer Q&A
are these for a 4x4?November 6, 2015
Jason W
10
I don't know, I have a 2 wheel drive and they work great and installation was as easy as the video.
November 6, 2015
Warren B
10
Yes, I bought these for my 07 4x4 Titan and they were a direct replacement
November 6, 2015
M T
10
Yes these will work on a 4x4
November 6, 2015
Josh P
10
yes
November 8, 2015
Marcel M
Will these work for my 07 Titan 2 wheel drive?November 23, 2015
Bret B
10
We installed on 08 Nissan Armada LE. Should be similar. Good Luck!
November 23, 2015
Heather B
10
No, these will only work on 4x4 models.
November 24, 2015
Brian F
10
What brand is this product?
November 25, 2016
Silvio M
Will this fit with a leveling kit?September 1, 2016
Trevor S
10
No, these are simply factory replacements.
September 2, 2016
Derek C
After installing the shock & Spring assembly on both sides, I noticed that my truck is definitely raised in the front. Is this normal? Does it level out?January 25, 2017
Daniel O
10
After a while of driving with the new strut and spring assemblies installed the front of your vehicle should drop to regular height. The reason for this is that the new coil springs need time to level out with the vehicle weight applied and tighten up for a lower overall height.
January 25, 2017
Alex P
Will these quick struts maintain the same ride height as the factory struts and springs?July 21, 2020
S I
10
Yes, this should restore your vehicle back to its original ride height. Please do not hesitate to contact us with any further questions.
July 21, 2020
Emma F
Anyone experience noise on shock after installing ?October 26, 2021
Altonio M
10
Hello, you may want to check the upper center bolt on the strut mount to ensure it is tightened down.
October 26, 2021
Ricale A
10
Yes
March 21, 2022
Gilbert M
How would the shocks themselves compare to Bilstien?February 9, 2022
Jack W
10
These are manufactured by TRQ. TRQ is a high quality, high-end name brand that we offer and back with our 1A Auto Limited Lifetime Warranty.
February 9, 2022
T I
Will these work for a 2010 pro 4x? Says not for off road package but I dont think there is any difference in front shocks on these models.March 22, 2023
Brandon D
10
Please provide your 17-digit VIN so we can confirm fitment, thank you.
March 22, 2023
Jessica D
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Nissan is a registered trademark of Nissan Motor Co., Ltd. 1A Auto is not affiliated with or sponsored by Nissan or Nissan Motor Co., Ltd.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.