This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Vapor Canister Purge Solenoid Valve 2003-04 GMC Envoy XL SUV
Created on:
Tools used
Flat Blade Screwdriver
8mm Socket
Ratchet
Cloth Rags
1. Removing the Vapor Canister Purge Solenoid
Disconnect the purge solenoid wiring harness
Pull the hose off the purge solenoid
Remove the 8mm bolt from the purge solenoid
Pull the purge solenoid up and out
2. Installing the New Vapor Canister Purge Solenoid
Take the gasket off the old purge solenoid
Put the gasket onto the new purge solenoid
Put the purge solenoid into place
Insert the 8mm bolt into the purge solenoid
Reconnect the purge solenoid wiring harness
Push the hose onto the new purge solenoid
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the vapor canister purge solenoid valve on this 2003 GMC Envoy XL. It's the same part and similar process on these XLs from 2002 to 2004. The items you'll need for this is a new vapor canister purge solenoid valve from 1AAuto.com, an 8 millimeter socket and ratchet, and a flat-blade screwdriver.
The vapor canister valve is right here. You want to just lift up on this tab and disconnect this harness and then just push in on the clip down here and then pull this hose up and out. Once that's removed, you can pull it right up and out.
On the left, is the old vapor canister purge solenoid valve. On the right, is the new one from 1A Auto. You can see they're identical, and they'll fit exactly the same. Take the gasket off your old vapor canister. Just wipe it off a bit and put it into place on your new canister. Push the bolt through and then just feed it down into place and tighten up that 10 millimeter bolt. Then reconnect your harness and push the hose back down into place until it re-clips. Then you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
214-646
In Stock
Product Reviews
Loading reviews
5.00/ 5.03
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
M
October 19, 2020
Perfect fit... fast shipping.... solved the problem
The perfect fit
Ron
September 9, 2021
Fits perfectly, solved the rough idle. Quality part.
Stanley
October 21, 2021
It worked great.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.