Kit Includes: (1) Passenger Side Tail Light Circuit Board (1) Driver Side Tail Light Circuit Board
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tail Light Circuit Board 2002-06 Dodge Ram 1500
How to Replace Tail Light Circuit Board 2002-2008 Dodge Ram 1500
Created on:
Tools used
Flat Blade Screwdriver
Phillips Head Screwdriver
T25 Torx Driver
1. Removing the Taillight Connector Plate
Remove the two T25 torx screws from the side of the taillight.
Pull the taillight straight out.
Using a flat blade screwdriver push the locking tab out.
Disconnect the harness.
Remove the four screws from the connector plate.
2. Replacing the Taillight Connector Plate
Switch over the bulbs to the new connector plate.
Push the connector plate into place.
Replace the four screws.
Connect the harness. Replace the locking tab.
Line up the taillight and push it back into place.
Replace the two T25 screws.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Okay, in this video, we're going to show you how replace the taillight connector plate in this 2004 Dodge Ram, same as any '02 to '06. Some symptoms of this is if your taillight doesn't work, and you're tried changing the bulbs. Many times, what happens is these connector plates either get water in them, or the contacts corrode causing your taillight to malfunction. Tools you'll need for this repair, T-25 torx driver, a flat blade screw driver and a Phillips head screw driver.
Okay, first, you're going to remove the taillight, T-25 Torx bit. There's two screws, one here and one down here. See, when I pull one out, the light starts moving. Okay, and then, you pull over here with this hand on the edge. Okay, there's basically two pins here that lock into holes there. Get the flathead screwdriver. There's a locking tab here. Just push it down and out. Then, push on a tab here and remove that harness. Okay, if your bulbs are okay, sometimes, what goes bad is this connector plate. It can get water in it to short out. Four screws.
Okay, and we'll just speed up as I remove those four screws with the Phillips screw driver. Okay, new connector plate from 1A Auto. You can see it's all the same. Okay, just change over our bulbs. You've got to check to make sure the bulbs are good. As you can see the filaments, not a bad idea to get new ones. Okay, connect your taillight.
Okay, and we'll speed it up again here as I just put in those four Phillips screws and tighten them up with the screw driver. Okay, reconnect your harness and your locking tab. Push the light in. You're all set. Okay, and we'll fast-forward through removing those four screws.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet Please feel free to call us toll-free at 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Gloves
T15 Torx Driver
Phillips Head Screwdriver
Safety Glasses
LHT07516
In Stock
Product Reviews
Loading reviews
4.78/ 5.09
9 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
2
0
0
0
Tail light circuit board
P
September 20, 2018
Easy to order online, fit perfectly and work excellent
Tail light circut board for '05 Dodge Ram 1500
Tony
April 24, 2019
This part was the same if not better than the manufactured part from Dodge...!!! Better quailty part and cheaper than the ones that Mopar put out...!!! Fit perfect in the tail light lens and didn't have to force the screws in...!!! Tk you 1 A Auto....!!!
Looked identical to factory. Fix my problem. Easy install.
Walter
November 10, 2021
Do you know if the purchase was in great shape they were awesome thank you very much
Christe
February 10, 2022
Easy to replace
New board new life all fixed no worries.
Randy
February 11, 2022
Well at first I thought I had to buy the whole complete assembly, because I kept buying tail light bulbs, cause they kept blowing.And I found that my circuit board had rust inside, so buying the the circuit board solve my problem.
Michael
December 18, 2022
It worked perfectly!!!! Just like if the part came from the dealership.
GOOD PRICES FAST SERVICE
David
November 26, 2023
just what i needed .Got my order in a few days and after putting on my parts that you sent me , I ws able to get my vehicle inspection, in time.
Thank you , 1A Auto !
Customer Q&A
Does this come with the rubber gaskets? Not pictured.August 19, 2019
Zach Y
10
This will not include the rubber gaskets. Please let us know if you have any further questions.
August 19, 2019
Emma F
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.