Kit Includes: (1) Passenger Side Tail Light (1) Driver Side Tail Light
Specification
Side Location
Driver & Passenger Side
Vehicle Light Option
with 1st Design
Product Features
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Taillight 2007-13 Chevy Silverado
Created on:
Tools used
Phillips Head Screwdriver
1. Removing the Tail Light
Remove the Phillips head screws from the tail light
Pull the tail light assembly from the back of the vehicle
Twist the sockets counterclockwise
Pry the harness retainer from the vehicle with a trim tool
2. Installing the Tail Light
Remove the old anchors from the rear with a trim tool
Press the tail light to the vehicle
Connect the wiring harness
Insert the new anchors into place
Tighten the Phillips screw to the tail light
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
What's up, guys? I'm Andy from 1A Auto. Today I'm going to be replacing the rear taillights on this 2008 Chevy Silverado. If you need parts for your vehicle, click the link in the description and head over to 1AAuto.com.
We're going to take these two Phillips head screws out. These are aftermarket screws. Whatever screws you have there, you're gonna wanna take those out, just use a Phillips head screwdriver.
Unscrew the top one, and unscrew the bottom one. Just grab the light assembly. You're just going to pull it towards the back of the vehicle. There we go. These are secured back here, these two little pins to go in there. And then we'll replace this harness right here. This harness is actually bad, someone tried to repair it and it's just no good. So we're going to take all these bulbs out.
Just untwist this and set the capsule aside. We're gonna take the bulbs out. Set the bulbs aside. Now, from underneath the vehicle, we're just going to grab a trim tool. We're gonna disconnect the harness from this retainer right here. Just slide it out. And, this one right here as well, pop that off. Then there's a connector right here at this junction box. Just push on this little lock tab, slide it out.
A little lock right there. We're going to slide this through, just like that. Let that hang right there, and we'll grab it from the top. Now just grab this harness, we'll just pull it through. Keep in mind what hole you're pulling this out of, because you're going to want to fish the new harnesses through there. Slide it out.
Here's our old tail light assembly. Here's our new taillight assembly from 1AAuto.com. As you can see, the shape is the same and the lenses are the exact same.
Flip it over. The mounting positions are the same. This actually comes with new anchors, so we can take the anchors out of the truck, and these will press right in. Comes with new sockets and taillight bulbs. Those are the same.
We'll look at the connector. Connectors are the same different color, but it's still the same connector. Get yours at 1AAuto.com and you'll be ready to rock and roll.
Before we install the new taillight, I'm just going to use a trim tool. We're going to take these anchors out because the new one comes with them.
You could use a straight blade screwdriver. Anything you can get just to pull them out. And some pliers or something. Just like that. Do the same with this one. We're gonna slide the new harness down that same hole where the old one came out of just like that. You can install these. Get those lined up with the holes, and these anchors up with the holes. We slide them into position. It may take a little bit of effort. This anchor hole is very rusty, so I'm just going to use a file.
Gonna line those up right there, push it in, and they should lock in place just like that. We'll slide this wiring harness back over this bracket back here, and over to this junction box. You're gonna plug this in first, just like that, lock it in place. Get that plugged in, and we can secure the wire with this little push retainer right like that. And we'll do the same over here. This one right there, just like that. Now we're gonna install these Phillips head screws. Get the top one started, and I'll start the bottom one.
Just snug them down, not too tight.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
LHT07558
In Stock
Product Reviews
Loading reviews
4.92/ 5.037
37 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
34
3
0
0
0
Great Product
BRENT
January 23, 2017
Taillights fit great on my 2014 Silverado. Super fast shipping and very easy install. Will order again from 1a auto.
Everything was great
John
March 4, 2017
Product worked great delivery was on time thank you
tail lights for '09 Silverado
Dick
March 29, 2017
very good quality. they fit well. very satisified
Great Deal
B
July 14, 2017
This is a great deal for a set of tail lights. i installed them myself. Mine did not come w the pins. Also had to remove the sockets where the pins go so that the new ones could go into the body of the truck. Overall it's a great buy and i trust 1A auto.
Matched original light and fit well.
P
February 23, 2019
Easy installations with plug and go wiring! Very pleased with the lights. Fit and worked like original light.
a perfect fit and a great price.
anthony
March 12, 2019
the replacement lights fit perfect. no need to mess with misaligned screw holes or any kind of nonsense. thanks for always having what I need at the price I want.
taillight set
C
March 18, 2019
great price, exactly as described, quick delivery. 5 star !!!
Direct replacement for my 08
Dennis
May 5, 2019
Bolted right up with no trouble. The set includes wiring harnesses and bulbs.
Rear brake light Assembly
U
July 18, 2019
Found online in short order. Competitively priced. Arrived on time and packaged well.
I Had the first one installed in about 30-40 minutes and learned a new language in the process.
Thank you 1A Auto. I will return.
Top rate service
W
August 16, 2019
Very easy to navigate the website, very good customer service
Kirk
September 12, 2019
??????
Great look, little difficulty with install
R
December 27, 2019
Lights work great and look fantastic, wish the back anchors went in smoother felt like I was close to breaking the light with amount of force I was pushing on it. Also wish they came with new screws to install on the side of the bed. Functionality though clip matched perfectly and goes in smooth, wiring all looks great and allows you to run lights how you want to. Overall very happy.
Tail light replacement
Russell
January 4, 2020
Service was great and parts were on time great customer service
Work
J
February 15, 2020
They fit like they should and, work. Even came with bulbs I'm happy
Awesome price and very fast delivery
Kody
March 5, 2020
These were a good price for a pair and the delivery was incredible fast, perfect OEM match to the original taillights, also bulbs were included so thats definitely a plus. Only down fall was that the wire lume wrapped around the wiring was bigger than the manufacturers so the plastic clips underneath the truck that hold the wiring up was difficult to put back on but I modified it a bit to make them work, other than that I highly recommend you purchase them for your replacement tail lights.
Rear tail lights for my Chevrolet 2500
L
August 1, 2020
They were very well packaged installed easily came with all new harness lightbulbs look great and work perfectWrite your review here. It must be at least 4 characters long. Consider whether you would recommend this product and what you like or dislike about it.
Tail lights
steven
September 12, 2020
Complete, plug and go for a decent price.
Tail.light replacement
John
December 1, 2020
Very nice product which matched factory lights. Bulbs and new wiring harnesses were included with this item and installation was straight forward and easy. Very pleased with items and 1A Auto!
Fast shipping and quality product
Randy
December 15, 2020
Tail lights fit perfectly and look great. I used my existing wires and they plugged in nicely.
Tail lights from 1a
Andrew
January 8, 2021
Great price, great quality!! Will make dang sure to order future parts from them!
Jon
February 21, 2021
Fast shipping. Quality parts fit perfect no problem will order more form A1
Easy installation
K
March 2, 2021
New tail lights were very easy to install and are much brighter now with clear lense.
Awesome
D
March 29, 2021
Really appreciate the timely manner the product came in ya know. The quality of it is very good. I even enjoyed assembling it on myself. Makes me want to try other parts. Thank you once again.
Parts
Brenda
May 5, 2021
They were easy and quick to install
Easy install
Tyson
July 11, 2021
Easy to install and looks great on my truck.
Great product and service from 1A Auto
Wade
August 19, 2021
Tail lights came well packaged and a couple days early. Perfect fit, and they look great
Happy
Benjamin
September 28, 2021
Super fast shipping. Ordered on a Monday, arrived mid day Tuesday. These tail lights came with the wire harnesses and bulbs. Easy install. If I could give more than five stars I would. Extremely pleased!!!!!!!!!!!
Kirk
November 11, 2021
Perfect fit easy install. Mine came with bulbs and wire harness
Tail lights
Brian
January 3, 2022
Easy instal and look great!
Jade
February 9, 2022
Quick delivery, excellent video on how to install very satisfied
Nice set
LEIGH
April 16, 2022
This set was delivered quickly. They had new wire harness, and bulbs installed. They were marked left and right side. They also had the new bracket grommets installed as well. They have only been on the truck a little over a week, and seem good so far.
Great Customer service
William
April 28, 2022
They are awesome quick to ship and take care of any problems will buy from them again
timothy
February 3, 2023
works and fit right in very pleased couldn`t ask for anything more
I highly recommend 1A Auto for replacement parts.
Rick
January 23, 2024
Finding the part was easy and the tutorial was very straightforward and easy to follow. The parts were as good as the original from the factory looks great.
Good fitment
Kimo
February 17, 2024
These looks great for a fraction of the price of OEM. Not quite the same quality but that's to be expected.
stephen
March 4, 2024
Easy install works great!
Shawn
May 23, 2024
They work great.
Customer Q&A
Is it that only 2 Philip screws hold this rear tail light assembly in??March 5, 2020
C H
10
Hello,
The light is held in with two screws and the mounting studs on the other side. Thanks!
March 5, 2020
Adam G
10
Yes but when you order the pair of tail lights they come with different bulbs and you cannot change just the lenses you have to crawl under your truck and completely change out five feet of wiring harnesses also which they do not tell you about I would suggest not getting them from them
March 5, 2020
J O
Do these come with the wiring harness? It shows that in the video, but cant tell by description.July 4, 2020
T C
10
They do and it would be way easier if they just used the pre existing one so you could just plug in your old lights. instead of having to crawl underneath the truck and disconnect an entire harness total pain
July 5, 2020
Johnathan L
10
Thank you for your inquiry! Yes, these tail lights will include the harness as shown. Please let us know if you have any further questions, thank you.
July 5, 2020
Jessica D
Does this come with the wiring harness? The video shows it, but the description does not make it clear.July 5, 2020
T C
10
Thank you for the inquiry. These will come with the wiring harness. The photos on the listing are up to date and also shows the difference for the bulbs as well (3047 vs 921). This would not come with replacement bulbs however.
July 5, 2020
Curtis L
Does this come with lights or is it just the housing?February 7, 2021
Patrick A
10
New light bulbs are not included. Occasionally, manufacturers leave test bulbs in the lights. If you receive test bulbs, you'll want to replace them with your original bulbs or with new bulbs.
February 8, 2021
Adam G
What type of bulbs does this require for a 2013 Silverado?June 12, 2021
Gary B
10
This will use the same bulbs as the OE part. It has a 3047 Backup light bulb.
June 14, 2021
Andra M
Will the current vehicle lights screw in to these without changing the wiring harness?April 30, 2022
Stuart T
10
Yes!
April 30, 2022
Nick D
10
Hello, this is a full assembly taillight with the circuit board included. They are a direct replacement confirmed with your full vehicle information.
April 30, 2022
Ricale A
10
Yes!
April 30, 2022
Nick D
Anyone know what kind and size of screws I need? Truck had different sizes and I don't want to strip any of them with the wrong screws.September 22, 2022
Isaiah L
10
Actual Measurements are not listed or available from the manufacturer.
September 22, 2022
Andra M
Does the light housing work with the existing factory harness, or does the included wiring harness have to be used? My light assemblies need replacing, but my factory bulbs & wiring are still fine.December 12, 2022
Christopher L
10
They worked with my existing harness.
December 12, 2022
Steven R
10
Hello, Our parts are exact replacements for your vehicle's OEM parts. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals. You should be able to use the existing wiring harness and bulbs.
December 13, 2022
Ricale A
are these made in USA?April 7, 2024
Billy G
10
DIY Solutions parts are made in multiple overseas countries.
April 8, 2024
Andra M
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.