TRQ ignition coils will have your engine running like new. TRQ ignition coils are manufactured to precise specifications using premium raw materials to optimize each vehicle's ignition system. To ensure peak performance, TRQ recommends replacing ignition coils in sets to prevent electrical output imbalances. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
High dielectric epoxy and reinforced bobbins for extended service life
Rubber, Silicone, or Phenolic Resin Shell: Prevents premature boot wear
Application Specific Design: No modifications required
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Ignition Coils 2002-11 Toyota Camry
Created on:
Tools used
Socket Extensions
Flat Blade Screwdriver
10mm Socket
Ratchet
1. Disconnecting the Battery
Disconnect the negative terminal with a 10mm socket
2. Removing the Ignition Coils
Remove the two 10mm nuts from the engine cover
Remove the engine cover
Disconnect the ignition coil wiring harness
Remove the 10mm bolt from the ignition coil
Remove the ignition coil
3. Installing the Ignition Coils
Insert the ignition coil into place
Tighten the 10mm bolt to the ignition coil
Connect the wiring harness
Reinstall the engine cover
Tighten the two 10mm bolts to the cover
4. Connecting the Battery
Connect the negative terminal with a 10mm socket
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Disconnect the negative battery terminal, it's a 10 millimeter nut.
Remove the plastic engine cover, two 10 millimeter nuts on the top. Cover should just slip off, let me put that aside. These are your four ignition coil packs, right on top of the engine. To remove them, well this tab is broken, but if the tab is not broken you push the tab in, pull it out. Push the lock in and pull it off.
To remove the coil pack, loosen the 10 millimeter bolt that's holding it into the head. This procedure's the same for the other three coils. Pull it straight up, and it'll come right off the spark plug. Repeat the procedure for the other three coils.
Install the new coil, and put it down over the spark plug. Until that gets tight, I'm just going to stop. Reconnect the modular connectors. Reinstall the plastic engine cover. The spark plugs and coils have been changed.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
ICA61736
In Stock
Product Reviews
Loading reviews
5.00/ 5.04
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
2005 Scion TC Ignition Coils
W
April 28, 2017
I bought them for a friend of mine, he was all smiles, excellent quality and saved a ton of money. Very fast delivery was icing on the cake.
Easy, Economical Fix
David
May 6, 2019
My car suddenly ran horribly but I made it back home. Had a (generic) Misfire Cylinder 3 code (4-cylinder engines don't run too well on 3 cylinders!). Switched the #2 and #3 coils and cleared the trouble code from my reader. Restarted engine, then got a Misfire Cylinder 2 code. AH-HA--problem found! Standard free shipping took about 4 or 5 days, but I didn't mind the wait. Replaced coil--literally a 10 minute job on an '02 RAV4--and I'm on the road again for a small investment in time and money.
DIY
Barney
June 2, 2022
EXCELLENT PRODUCT. EADY TO INSTALL
Great quality
Frank
February 6, 2024
Three years after my purchase and it's still working great!! Never had an issue with it anymore. Excellent quality and price
Customer Q&A
Does this part fit a 2007 Camry HYBRID made in Japan?February 27, 2021
Greg L
10
Yes, according to the information you provided, this part will fit your vehicle as long as you have a L4 2.4L.
March 2, 2021
Emma F
Does this part fit 2006 rav4 v6 limited made in Japan?July 7, 2022
Loi T
10
This is not the correct part for your vehicle, but we do carry the one you need. The correct part number is: ICA61776.
July 7, 2022
Emma F
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Toyota is a registered trademark of Toyota Motor Corporation. 1A Auto is not affiliated with or sponsored by Toyota or Toyota Motor Corporation.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.