Replaces
Frequently bought together
Part Details
Specifications
Product Features
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money preparing and maintaining your vehicle. I'm going to use my 21 plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video we'll be replacing the parking light on this 98 Toyota Camry, with the lovely snow falling around it, same as any 97 to 01 Camry. The only tool you'll need is a flat blade screwdriver. Remove the parking light by using a screwdriver. The little clip right on here on top, you pull up the middle of the clip top and then you get under the clip and pull it out. Actually at this point the parking light is just clipped in to the headlight and the fender, so you'll to want to firmly- it's a little hairy here- but just firmly pull out on that. Now I've got to unclip it from the fender, thread on the headlight and reach in and then gently loose the headlight and pop it off. Then, the bulb twists out of the parking light, and there.
You could now replace your parking light or service the bulb if you need to by twisting it and pulling it out. To install the parking light put the bulb back in and twist to lock it. Then you have a tab here that's going to go into here, and then this tab is going to go into the headlight. First you've got to work that underneath, put the light up against the fender and up against the headlight. Just make sure you get everything lined up all right. It should too high or too low there, and it falls back in. Then you've got your clip. Pull the middle up, push the clip down and it's locked in place, and there you go.
Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Feel free to call us toll free 888-844-3393. The company that's here for you on the internet and in person.
SLA87776
