TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Direct Bolt-on Replacement: No modifications or special tools required
Complete Assembly: includes same mirror glass, housing, bracket and technology as the original unit
DOT Certified: Built to the highest quality standards
FMVSS-111 Compliant: Validated to be a dealership alternative
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How To Install Replace Remove Side Rear View Mirror 2002-06 Nissan Altima
Created on:
Tools used
Flat Blade Screwdriver
10mm Socket
Ratchet
1. Removing the Mirror
Pry off the mirror base trim panel with a flat blade screwdriver
Disconnect the mirror wiring harness
Remove the three 10mm nuts from the mirror
Pull off the mirror
2. Preparing the New Mirror
Pry the cover off the new mirror
Have the cover painted to match your vehicle
Alternatively, pry the cover off the old mirror with a flat blade screwdriver
Snap the matching mirror cover onto the new mirror
3. Installing the New Mirror
Push the new mirror into place
Fasten the three 10mm nuts onto the mirror
Connect the mirror wiring harness
Push on the mirror base trim panel
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the side mirrors on this 2003 Nissan Altima. It's the same process on these vehicles from 2002 to 2006. The items you'll need for this are new side mirrors from 1AAuto.com, a flat-blade screwdriver and a 10mm socket and ratchet.
Start off by prying off this triangular panel at the top of your door panel. You can see the mirror's held in with three 10mm nuts. With the harness, right here, you just want to push down that tab and pull out on the harness. We'll just fast-forward as Don removes those three nuts. Once those are removed, the mirror pulls right off.
On the left, is the new one from 1AAuto, on the right is the old one. You can see they're identical and will mount exactly the same. You can see, here, that the back of the side mirror actually comes off. You can spray paint this to match or go to a parts store with a paint department and have them match the paint for your vehicle and spray-paint it with the exact paint, or you can just remove the back of your old side mirror if it's still intact. You just stick a screwdriver in that slot, pry out, and then pry it around the edge here. It comes off and you can actually just snap that onto your new mirror from 1A Auto. Now it matches. You line it up on your car, push it into place and start off by replacing the nuts, carefully by hand. Once you have them on there hand-tight, then just tighten them up with your socket and ratchet or your wrench. Reconnect your harness, put that triangular panel back on and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
MRA05787
In Stock
Product Reviews
Loading reviews
5.00/ 5.01
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Winning!
Stephen
August 11, 2017
Great product from great company and the install video was very helpful. I'll be back
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.