Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Fog Lights 2007-12 Ford Escape
How to Replace Fog Lights 2007-12 Ford Escape
Created on: 2019-03-07
Tools used
Socket Extensions
Flat Blade Screwdriver
Phillips Head Screwdriver
Jack Stands
10mm Socket
Ratchet
Floor Jack
Trim Tool Set
1. Removing the Front Bumper
Remove the 10mm bolts from the top of the grille
Pry out the push clips from the front of the wheel well liner with a trim tool
Remove the four 10mm bolts from the splash shield
Remove the push clip from the inside of the splash shield
Remove the 10mm bolts along the front of the splash shield
Remove the Phillips screw from the wheel well liner
Remove the push clip from the top of the wheel well liner
Press the push tab between the bumper and the body (behind the headlight) if the bumper has never been removed
Repeat for the other side
Disconnect the fog light wiring harnesses
Remove the push pin from the radiator slot
Pull the bumper forward and off
2. Removing the Fog Light
Pinch the retainers with needle nose pliers
Remove the fog light from the bumper
3. Installing the Fog Light
Insert the fog light into the bumper and lock it in place
4. Installing the Front Bumper
Insert the bumper into place and press in the sides
Insert the push-pins into the radiator slot
Press the splash shield into place
Tighten the four 10mm bolts to the splash shield
Press the push pin into the splash shield
Connect the fog light wiring harness
Press the push-pins into the wheel well liner
Tighten the Phillips screw to the wheel well liner
Repeat this procedure for the passenger side
Tighten the 10mm bolts to the grille
1ALFP00333
In Stock
Product Reviews
Loading reviews
4.00/ 5.01
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
kalil
January 27, 2024
Good
Customer Q&A
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.