How to Replace Blower Motor 2005-16 Ford Mustang

One of the first things I'm gonna do is I'm gonna take out this glovebox right here. If you were to look right underneath, you're going to see four mounting bolts. I'm gonna remove those. Grab the glovebox. Be careful, this might wanna fall down. Grab those sides, pull her right out.

We have the glovebox off. We have a clear view of what's going on. I'm just gonna grab this little tab, give it a little tug, and then pull down on this. It doesn't wanna come out. I'm just going to grab my pocket screwdriver. But this looks like it should come out. There it is. Check your connection. Make sure it looks good. This one does. You're gonna see you have some mounting bolts here, one, two, three. Those are 8 millimeters. Okay, this is what's holding up the . Let's pull this down and get it out of here.

All right. So while we're under here, pay attention to this spot right here. There's a spot under the dash that you need to match that up with. You need to locate it right up against the firewall in the corner there. I'm just going to slide this up. I'm going to start in all these mounting bolts. I got them all started. Okay. All three of these are bottomed out. We're just going to go a teeny bit further. These are only screwing into plastic so you don't want to go too tight with these. Grab that electrical connector, click it in, give it a tug. Perfect. Oh, yeah, perfect

Let's get our glovebox back in here. First, you put one side, put up the other side. I'm just gonna latch it in. That's gonna hold it for me. Now I can come like this. We're gonna screw in all of our downing screws down along here. Snug them up. Awesome.