How to Replace Blower Motor Resistor 1994-2004 Ford Mustang
Created on: 2011-12-28
If the blower motor resistor needs to be replaced, watch this video to learn how to easily do it yourself!
-
step 1 :Removing the Fan Resistor
- Remove the two 8mm bolts from the fan resistor
- Pull down the fan resistor
- Disconnect the fan resistor wiring harness
-
step 2 :Installing the New Fan Resistor
- Connect the fan resistor wiring harness
- Push the fan resistor into place
- Insert the two 8mm bolts into the fan resistor
Tools needed
-
Socket Extensions
8mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you how to replace the air conditioning and heater fan resistor. This is on a 2000 Ford Mustang, same as any '94-'04. The only tool you'll need is an 8mm socket with a ratchet and extension. Basically, when this starts going bad, you start to lose fan speeds. I've seen vehicles that only have high, or maybe they will work on the 2 low speeds but not the high speeds.
Your resistor is right up underneath here. There are two 8mm bolts. Here's your resistor hanging down. You just want to push on a little tab here, and pull your connector out.
Here's a new resistor from 1A Auto. Plug it right in. Push it right up in place here. Once you have both bolts fed in by hand, then use your 8mm socket with ratchet and extension and tighten them up.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
How to Replace Blower Motor Resistor 2000-06 Nissan Sentra
If you can't change the vent speed in your 00-06 Nissan Sentra, check out this video on how to replace the blower motor resistor, and fix it yourself!
