How to Replace Hood Latch 2000-06 GMC Yukon

Let's take this cover off. I'm just gonna use a trim tool. There's pushpins to take off. Take the center part out and then underneath we have those two on the front, those two further out, and then three on the top. Pull this cover off. And I'm just gonna take a felt tip pen and just mark where the old mount is or the hood latch because we wanna put it back in the same position when we go back together. Now there's two 10-millimeter bolts right here, and one on the other side. Use a 10-millimeter socket, take those off. Take those bolts out and grab that, slide that out of the way. Just use some needle-nose pliers, disconnect the cable right here. Just squeeze it, pull it through, and slide it out, just like that. Take this hood cable, just slide it around this hook right there and press the rest in, just like that, so it locks in place. And line it up, take the bolts, get the bolts started. So when you go to tighten these down, just make sure your lines line up as close as you can to where they were when you took the old one out. And tighten those up. That's good. And put this cover on. And put these pushpins in. Lock them down. Make sure the hood lines up. Look's good to go.