How to Replace Windshield Wiper Linkage 1995-2000 Chevy Tahoe
Created on: 2014-03-25
How to repair, install, fix, change or replace a broken, bent, damaged, failing or squeaking windshield wiper transmission linkage on 95, 96, 97, 98, 99 Chevy Tahoe or GMC Yukon.
-
step 1 :Removing the Wiper Arm
- Pry out the wiper arm clip with a flat blade screwdriver
- Pull the wiper arm up and off
- Repeat the process for the other wiper arm
-
step 2 :Removing the Cowl Panel
- Remove the two Phillips screws from the cowl panel
- Pull the panel off
- Remove the Phillips screws on either side of the cowl panel
- Remove the weatherstrip
- Remove the six Phillips screws along the cowl panel
- Remove the cowl panel forward
- Disconnect the washer hose
-
step 3 :Removing the Wiper Linkage
- Loosen the two 10mm nuts from the driver side linkage
- Pull both linkages from the wiper motor stud
- Remove the three 11mm bolts from the driver side linkage post
- Remove the wiper linkage
-
step 4 :Installing the New Transmission
- Remove one of the 10mm nuts and loosen the other on the new linkage
- Feed the linkage into place
- Push the linkage onto the wiper motor stud
- Pull the linkage post through
- Insert and tighten the 11mm bolts to the driver side linkage post
- Push the linkage on and line it up in the center
- Insert and tighten the 10mm nuts
-
step 5 :Installing the Cowl Panel
- Insert the cowl panel
- Connect the washer hose
- Insert the Phillips screws on the either side of the cowl panel
- Replace the six Phillips screws in the center of the cowl panel
- Replace the side panels
- Insert the Phillips screws on either side
- Push the weatherstrip on
- Close the hood
-
step 6 :Installing the Wiper Arm
- Insert the wiper arm onto its slot
- Replace the cap on the wiper arm
- Repeat the process for the other arm
Tools needed
-
Flat Blade Screwdriver
Phillips Head Screwdriver
10mm Socket
Ratchet
11mm Socket
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the driver's side wiper linkage on this 1996 Chevy Tahoe. The items you'll need for this is a new driver's side wiper linkage from 1AAuto.com, a Phillips screwdriver, a flat blade screwdriver, a 10mm and 11mm socket and ratchet.
First, using a flat blade screwdriver, just pry up this clip, pull the wiper arm up and off. Do the same for the other wiper arm.
Next, you want to remove this Phillips screw from either side of your vehicle. Then this panel just pulls off, and repeat the process on the other side. Then remove this Phillips screw and the Phillips screw on the same spot on the other side. We'll just fast-forward as Don does this. Now pull off your weather strip and remove these six additional Phillips screws. We'll fast-forward while Don does this. Now pull the cowl up and forward, and now you just want to pull your washer hose off and slide the cowl out.
Next, loosen up these two 10mm nuts. Once you've done that, you can push it right off that stud. Then remove these three 11mm bolts. Now we'll just fast-forward as Don does that. Now you can pull your driver's side linkage up and out.
In the back, is the old wiper linkage; up front is the new driver's side wiper linkage from 1AAuto.com. You can see they're identical, and they're going to fit exactly the same. Now loosen up the two 10mm nuts on your driver's side wiper linkage. Feed it back into place.
Pull the linkage post up into place, and push the other end onto the wiper motor stud. Then replace those three 11mm bolts. Now tighten up those three bolts. Then the two 10mm nuts, you can actually adjust the linkage a little bit. If you want at this point, you could put the wiper blade back on, adjust it so it parks correctly, and then tighten those nuts up.
Now, put your cowl panel back into place and reconnect the washer hose. Then line it up and replace those two Phillips screws on either side of the cowl panel. Then replace the six screws in the center of the cowl panel. Now replace those two side panels and the Phillips screw that holds them into place. Push the weather strip back on. Then close your hood.
You want to line up that line with the slot, push the arm back onto the post, push the tab in, put the arm down, and then repeat the process for the other arm. Then you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
Chevrolet GMC Cadillac Driver & Passenger Side Windshield Wiper Transmission Arm 2 Piece Set TRQ WWA06899
Part Details:
- (1) Passenger Side Windshield Wiper Transmission Arm
- (1) Driver Side Windshield Wiper Transmission Arm
- 2 Piece Set
How to Replace Windshield Wiper Transmission 1995-2000 Chevy Tahoe
How to repair, install, fix, change or replace a broken, bent, damaged, failing or squeaking windshield wiper transmission on 95, 96, 97, 98, 99
